Auckland Concrete Cutting Contractors
Call 09 886 7171Concrete Cutting Services in Auckland
When a project calls for clean, accurate cuts through hard surfaces, our team delivers the precision the job needs. We provide Auckland concrete cutting for builders, tradespeople, developers, and homeowners, using diamond saws and drilling rigs to work through slabs, walls, floors, and pavements. From forming a single doorway to sawing joints across a large commercial floor, we approach every cut with the same care and attention to detail.
Whether you are creating openings, drilling for services, or sectioning a slab for removal, we plan the work carefully and keep the site tidy from start to finish. Our operators check for embedded services, set the correct depth, and manage dust and slurry as they go. Get in touch for a free, no-obligation quote and we will recommend the right method for your project.
Our Concrete Cutting and Drilling Services
Slab and Floor Sawing
We use walk-behind floor saws to make straight, controlled cuts through slabs, driveways, footpaths, and warehouse floors. This is ideal for creating clean lines when sectioning, removing, or altering a horizontal surface, and the depth is set precisely to match the job.
Wall Sawing
Track-mounted wall saws let us cut accurately through vertical and inclined concrete, including block and reinforced walls. We can form window openings, doorways, vents, and stair penetrations with square edges and minimal disruption to the surrounding structure.
Core Drilling
Diamond core drilling produces clean, round holes for pipes, cabling, plumbing, ducting, handrails, and bolt fixings. We drill through floors, walls, and foundations at a range of diameters and angles, leaving a neat bore that needs little to no making good.
Control and Expansion Joint Cutting
We cut control and expansion joints into fresh and existing slabs to manage shrinkage and movement. Well-placed, correctly timed joints help direct where any cracking occurs, protecting the appearance and longevity of driveways, patios, and commercial floors.
Openings for Doors, Windows and Services
Need to alter an existing structure? We cut precise openings for new doors, windows, hatches, and service penetrations. Careful measuring and clean edges mean the opening is ready for framing or fitting without extra patching work.
Road and Footpath Cutting
For civil and repair work, we saw through roads, kerbs, footpaths, and asphalt to allow for trenching, reinstatement, and utility access. Our operators keep cuts straight and consistent so reinstated sections sit flush and tidy.
Why Property Owners Trust Our Cutting Team
Skilled, Qualified Operators
Our operators are trained on saws and drilling rigs and understand how to read a slab, allow for reinforcement, and set the right depth so every cut is accurate and predictable.
Precise, Clean Results
We plan each cut before starting, marking lines and checking measurements so openings and holes are square, straight, and sized correctly, leaving edges that rarely need patching.
Dust and Slurry Management
We control airborne dust and manage slurry on wet cuts, keeping the work area cleaner and safer while protecting your property, finishes, and nearby fittings from mess.
Modern Diamond Tooling
We run well-maintained saws, drills, and diamond blades suited to concrete, block, asphalt, and reinforced sections, which keeps cutting efficient and reduces vibration and noise.
Safety and Site Awareness
Before any blade turns, we check for embedded services, assess access, and set up the site so cutting is carried out safely around people, structures, and existing utilities.
Residential and Commercial Work
From a single doorway or a few core holes at home to larger civil and commercial projects, we scale our approach and equipment to match the size and setting of the job.
Concrete Cutting FAQs
Answers to common questions about our cutting and drilling work — the materials we cut, depth limits, wet versus dry methods, core drilling, and pricing.
We cut a wide range of hard materials, including reinforced concrete, plain concrete slabs, block and brick walls, kerbs, asphalt, and pavers. Reinforcing steel within a slab or wall is not usually a problem, as our diamond blades and core bits are designed to cut through both concrete and embedded rebar. If you are unsure whether your material or structure is suitable, describe the job and, where helpful, we can inspect it on site before recommending the best cutting method and equipment.
The achievable depth depends on the method and equipment used. Floor saws typically handle common slab and pavement thicknesses in a single pass, while thicker or heavily reinforced sections may be cut from more than one side or with larger blades. Wall saws can work through substantial walls, and core drilling can reach considerable depths using extension rods. During assessment we confirm the thickness, reinforcement, and access so we can select the right saw or drill and give you a realistic idea of what is possible.
We use both wet and dry cutting depending on the material, location, and finish required. Wet cutting uses water to cool the blade and suppress dust, which produces slurry that we contain and clean up as we go. Dry cutting is sometimes better for indoor or moisture-sensitive areas, and we pair it with extraction and containment to limit airborne dust. Either way, managing dust and slurry is part of the job, and we take steps to keep your property and the surrounding area clean and safe.
Yes. Diamond core drilling is one of our core services. We drill clean, accurately positioned holes through floors, walls, and foundations for plumbing, drainage, electrical, ducting, air-conditioning, handrails, and bolt fixings. Holes can be drilled at various diameters and angles, and the finished bore is neat enough that it usually needs little making good. Just let us know the diameter, depth, and location, and we can advise on the right approach and check for any services before drilling begins.
Pricing depends on the type of cut, the thickness and hardness of the material, the amount of reinforcement, access to the area, and how many cuts or holes are required. Straightforward jobs are usually quick and affordable, while thicker sections, awkward access, or larger volumes take more time and equipment. Water supply, waste handling, and site setup can also play a part. The most reliable way to get a firm figure is to share the details of your project so we can provide a clear, itemised quote for the work.
Need a precise cut or a few core holes?
Tell us about your site and we'll get back to you fast.